ZNID GE 2804:  FiberJack active ethernet Wall plate ONT

Overview

The DZS 2800 series FiberJACK® Active Ethernet ONTs provide the ultimate efficient installation experience for Enterprise and Hospitality deployments requiring secure, zero-footprint wideband access. The FiberJACK wall-plate style ONTs offer full RG functionality in a low-profile package that keeps power and fiber connections safely hidden within the wall, preventing loss of service due to accidental disconnection, tampering or theft. Rental Housing (Apartments, Condos) and Campus (Dorms, Temporary Housing) deployments will similarly benefit from this robust and low maintenance ONT.

All DZS 2800 series FiberJACK Active Ethernet ONTs mount in a standard single-gang wall box and are available in two powering versions. AC models are wired directly to the 120/240 VAC supply while DC models may be powered via a dedicated CAT5 link from the wiring/powering closet. DC models may also be powered over a 2-wire feed from an in-house 48V distribution system that may also provide battery backup. DC/DC conversion in the ONT ensures that the PoE voltages are presented within spec even when longer 2-wire power feed runs incur significant voltage drops.

The DZS 2800 series FiberJACK Active Ethernet ONTs provide customers with 4 10/100/1000BaseT LAN ports, all with PoE capability, allowing for convenient connections to IP phones, switches, and PCs. Configurable per-port PoE limits help direct PoE power where it is needed. High-speed internet access and IPTV services are also easily provisioned through flexible management features via the ONT’s built-in WebUI or USP (Unified Service Provisioning).

Hospitality installations will appreciate the guest-friendly LED indicator modes (Day, Night, Off) on the DZS 2800 series FiberJACK Active Ethernet ONTs. Extensive diagnostics in the ONT (run locally on the ONT or remotely from the NOC) reduce service call disruptions. A silent alarm is triggered upon removal of the ONT faceplate.

With LLDP-MED support for voice VLAN advertisement and DZS’ Dynamic VLAN Mapping capability for handling complex sets of packet classification rules, operators can expertly manage traffic on each ONT LAN port to provide optimum customer experiences.

Flexible management means the DZS 2800 series FiberJACK Active Ethernet ONTs may be provisioned using the same intuitive Web interface and CLI as the DZS 2400, 2600 and 4200 series ONTs, as well as through USP (Unified Service Provisioning), the DZS Network Management System (ZMS), or using a TR-069 compliant ACS. Software upgrades and configuration backups can be handled automatically by the ZMS using the CPE Manager feature.

View printable version

Specifications

Key Features
  • Low profile “wall-plate” style
  • No exposed fiber or power
  • Secure attachment
  • AC or DC powering
  • 1 Gbps Ethernet fiber uplink
Weight & Dimensions
  • 1.0 LB 0.45 kg

Faceplate:

  • 5 5/8″ H x 4″ W x 1 3/16″ D
  • 143mm H x 102 mm W x 30mm D

Base:

  • 2 3/4″ H x 1 3/4″ W x 1 1/4″ D (from wall surface)
  • 70mm H x 45 mm W x 32mm D (from wall surface) 1.5 in. H x 10 in. W
Power

AC Models:

  • 100-240 VAC 50/60 Hz
  • Max Power = 40W (ONT + 20W PoE load)
  • Max Power = 12W (ONT only)

DC Models:

  • 48 VDC (nom.)
  • Max Power = 40W (ONT + 20W PoE load)
  • Max Power = 10W (ONT only)
Interfaces

Active Ethernet Uplink (GE)

  • SC/UPC connector
  • 1310nm Tx (Upstream)
  • 1490nm Rx (Downstream)
  • Fixed SFF optics
  • Tx Data Rate: 1.0 Gbps
  • Tx Launch Power: -8 to -2 dBm
  • Rx Data Rate: 1.0 Gbps
  • Rx Receiver Sensitivity: -23 dBm
  • Rx Input Power Overload: -2 dBm

Ethernet

  • RJ-45 Jacks
  • 4 x 10/100/1000 Base-T ports
  • Meets IEEE 802.3 specifications
  • Auto-MDI/MDIX and auto speed supported
  • Per-port Link/Activity, Speed and PoE indicators
  • PoE support on all ports
  • Max 20W PoE load per ONT (AC models)
  • Max 20W PoE load per ONT (DC models)

Controls and Indicators

  • ONT Power On/Off (recessed slide switch)
  • ONT Reset (recessed push-button switch)
  • LED Indicator Mode (push-button switch)
  • LED indicators for Status, Alarm, WAN, and Config
Standards Support
  • IEEE 802.3 Ethernet
  • IEEE 802.1q/p VLANs
  • IEEE 802.3u Fast Ethernet
  • IEEE 802.3ab 1000Base-T
  • 802.3at compliant
  • 802.1x (specific models)
Protocol Support

QOS

  • Ethernet bridging/switching per IEEE 802.1d/802.1q
  • Traffic management (priority queuing)
  • QoS with support for IEEE 802.1p + DSCP VLANS

VLANs

  • Per port IEEE 802.1q VLAN ID processing
  • All VLAN IDs supported
  • VLAN tagging/untagging
  • VLAN Stacking (QinQ)
  • VLAN Switching

IPTV

  • IGMP v2 Snooping
  • VLAN support

Layer 2

  • 3n flow control
  • Automatic MAC learning and aging
  • Support for up to 4,096 MAC addresses for RG traffic flows
  • Broadcast storm control
  • LLDP-MED

IP Routing and Firewall

  • PPPoE
  • NAT/NAPT
  • Port forwarding
  • DHCP Server
  • DNS Server
  • UPnP
Management
  • Web UI
  • CLI
  • SNMP
  • USP (Unified Service Provisioning)
  • TR-069
Operating Requirements

Operating Temperature:

  • Temperature: 0°C to +40°C
  • Humidity: 5% to 95% relative humidity (non-condensing)
Regulatory Compliance
  • CE
  • UL
  • FCC Part 15, Class B
  • FDA 21CFR1040

Ordering Information

Model
Description
ZNID-GE-2608T-xx
Indoor Gigabit Active Ethernet ONT, 0xPOTS, 8xGE(PoE); xx = NA, UK, EU power supply
ZNID-GE-2804P-WAC
FiberJACK Indoor Active Ethernet (GE Fiber Uplink) ONT, 4 x GE w/PoE, AC Powered
ZNID-GE-2804P-WDC
FiberJACK Indoor Active Ethernet (GE Fiber Uplink) ONT, 4 x GE w/PoE, DC Powered