MXK VDSL2 48-PORT LINE CARD WITH VECTORING: MXK-VDSL2-BCM-17A-48-V

Overview

DZS’ MXK intelligent terabit access concentrator reflects a clean-sheet approach to a truly scalable multi-service architecture that is designed to meet the rapidly evolving demands on access networks. The MXK is a full-featured Multi Service Access Platform enabling service providers to combine data, video and voice in one platform over a pure packet access network. MXK gives carriers the flexibility to cost-effectively deliver triple play services over existing facilities. The MXK VDSL2 48-port line card with vectoring and bonding for the MXK is a high-density high-bandwidth module for the MXK 819/823 and MXK 319 chassis.

DZS’ MXK VDSL2 48-port line card provides VDSL2 speeds, which include the ability to provide both symmetric and asymmetric bandwidth. The Broadcom-based MXK VDSL2 48-line card supports up to profile 17a, as well as ADSL2 fallback, link bonding and vectoring. The VDSL2 line card on the MXK also provides ADSL2+ compatibility, allowing service providers to provide both VDSL as well as ADSL service.

The minimum software release required is MXK 2.4.1.224.

DZS’ SLMS (Single Line Multi-Service) access operating system provides intelligent functionality across all of the company’s hardware products. Driven by more than ten years of experience in commercial operation and collaboration with 700+ service providers worldwide, DZS’s SLMS software delivers functionality critical to today’s access networks in advanced networking, quality of experience, voice, security, and management.

View printable version

Specifications

Key Features
  • ITU-T G.993.2 Compliant VDSL2 with ADSL2+ Fallback
  • Supports Profiles 8a, 8b, 8c, 8d, 12a, 12b, 17a
  • Supports G.Vector and G.INP
  • ADSL2+ Compatible (both ATM and PTM modes)
  • Environmentally Hardened
Power
  • 29w Nominal, 53w Maximum (Nominal plus 0.51w per port)
Interfaces
  • 48 Port VDSL2 interfaces connected by two standard 50-pin Amphenol’s on front of card
Standards Support
  • ITU-T G.992.1 G.dmt ADSL (Annex A)
  • ITU-T G.992.2 G.lite ADSL (Annex A)
  • ITU-T G.992.3 ADSL2 (Annex A and M)
  • ITU-T G.992.5 ADSL2+ (Annex A and M)
  • ITU-T G.993.2 VDSL2 (Annex A and B)
  • ITU-T G.993.5 G.vector
  • ITU-T G.996.1 (G.test)
  • ITU-T G.997.1 (G.ploam)
  • ITU-T G.998.4 (G.inp)
  • ITU-T G.999.1 (G.int)
  • ITU-T G.998.x (G.bond)
  • IEEE 802.3ah 10-PASS-TS
  • ANSI T1.413 Issue I and II
  • ETSI TR-328
  • ETSI TS-101-270
Protocol Support
  • DHCP Relay
  • Bridging 802.1D
  • VLAN 802.1Q
  • 802.1p marking and queuing
  • Rate limiting
  • IPv4 / IPv6
Management

Terminals

  • ZMS management system
  • Via SNMP v2/v3
  • Terminal for Command Line Interface (CLI)

Management Interfaces

  • Out-band IP over 10 / 100 Base-T Ethernet or V.24 serial for async terminal

up to 80km using either single or dual fiber SFPs

Regulatory Compliance
  • Safety: UL 60950-1; CSA 60950-1; EN 60950-1
  • Emissions: EN 55022A; PART 15A (FCC)
  • Immunity: GR-1089-CORE, Issue 3; SR-3580, Issue 1; ATT-TP-76200, Issue 14;
  • VZ.TPR.9205, Issue 3
  • Environmental: GR-63-CORE, Issue 3
Operating Requirements
  • Ambient operating temperature: -40º C to +65º C
  • Relative operating humidity: up to 85% (non-condensing)
  • GR-487 compliant
  • Designed for outside plant deployment

Ordering Information

Model
Description
MXK-VDSL2-BCM-17A-48-V
48-port VDSL2 line card
MXK-CBL-24-C5-120DG-30FT-BLUNT
25-pair to 30-foot blunt-cut cable (req (2) per line card)
MXK-CBL-24-C5-120DG-50FT-BLUNT
25-pair to 50-foot blunt-cut cable (req (2) per line card)
MXK-CBL-24-C5-120DG-100FT-BLUNT
25-pair to 100-foot blunt-cut cable (req (2) per line card)

Related Products

MXK-VDSL2-BCM-17A-48-V
Related Products