MXK ADSL2+ BONDING CAPABLE LINE CARDS WITH INTERGRATED DERIVED POTS: MXK-ADSL2+-POTS-BCM-48A-2S,MXK-ADSL2+-BCM-48A,MXK-ADSL2=-SPLTR600-BCM-48A-2S,MXK-ADSL2=-SPLTR900-BCM-48A-2S

Overview

DZS’ MXK intelligent terabit access concentrator reflects a clean-sheet approach to truly scalable multi-service architecture, designed to meet the rapidly evolving demands on access networks. The MXK is a full-featured Multi Service Access Platform enabling service providers to combine data, video and voice in one platform over a pure packet access network. MXK gives carriers the flexibility to cost-effectively deliver triple play services over existing facilities. The ADSL2+ line cards for the MXK are high density modules that provide very high speed non-blocking asymmetrical bandwidth for the MXK 819/823 and MXK 319 Chassis.

DZS’ ADSL2+ line cards for the MXK have 48 ports providing ADSL2+ speeds, which include the ability for higher upstream speeds (up to 3Mbps) using Annex M. The ADSL2+ line cards supports integrated derived POTS enabling remote distribution of data and voice.

ADSL2+ Bonding is supported on this line card effectively doubling the available bandwidth to the subscriber. Bonding two ADSL lines together provides the opportunity to extend current subscriber services further from the central office. ADSL line bonding also provides more bandwidth for service subscribers looking to deploy high-revenue services such as IPTV. As with other technologies, DZS offers a complete end-to-end bonded ADSL solution with the 6228 Bonded ADSL2+ modem.

The integrated derived POTS lines convert packet voice to PSTN POTS allowing service providers to take advantage of a low-cost packet network and still provide subscribers with traditional POTS service. The card supports packet voice protocols SIP, MGCP, and H.248. For easy migration from TDM voice to packet voice, the MXK can be connected to the MALC Voice Gateway card to provide GR-303 or V5.2 termination with packet voice connection to the ADSL+POTS card at a remote site.

DZS’ SLMS (Single Line Multi-Service) access operating system provides intelligent functionality across all the company’s hardware products. Driven by 8 years of experience in commercial operation and collaboration with 700+ service providers worldwide, DZS’ SLMS software delivers functionality critical to today’s access networks in advanced networking, quality of experience, voice, security, and management.

View printable version

Specifications

Key Features
  • High Density ADSL2+
  • Line Card with Integrated Derived POTS
  • Operates in the MXK 819/823 and MXK 319 Chassis
  • Environmentally Hardened
  • Broadcom Phy-R Support
  • ADSL2+ Bonding Support
Interfaces
  • ADSL2+ Annex A, M,
  • ADSL2+, w/ splitter
  • ADSL2+ w/ Integrated POTS
Standards Support
  • ITU G.992.1 (full-rate G.dmt)
  • ITU G.992.2 (G.lite)
  • ITU G.992.5 (ADSL2+)
  • ITU G.994.1 (Hand Shake Protocol)
  • ITU G.997.1 (Physical Layer Management)
  • Annex M (on AnnexA cards only)
  • SELT/DELT
  • Loop bonding
  • Power Management
  • Broadcom Phy-R
Voice Support

48 ports of derived POTS

TDM voice and packet voice supported

Packet voice protocols supported:

  • SIP PLAR
  • SIP
  • H.248
  • MGCP

 

Protocol Support
  • RIP v1 (RFC 1058)/RIP v2 (RFC 2453)
  • DHCP Server (RFC 2131, 2132)
  • DHCP Relay
  • Bridging 802.1D
  • VLAN 802.1Q with 802.1p Priorities
  • VLAN Q-in-Q
  • Multicast IGMP v2, v3
Management

Terminals

  • ZMS management system via SNMP v2c for GUI and CORBA IDL machine interface
  • Terminal for Command Line Interface (CLI)
  • Built-in Web GUI Management

Management Interfaces

  • In-band
  • Out-band IP over 10 / 100 Base-T Ethernet
Operating Requirements
  • Ambient operating temperature: -40º C to +65º C
  • Relative operating humidity: up to 85% (non-condensing)
  • GR-487 compliant
  • Designed for outside plant deployment

Ordering Information

Models
Model
Description
MXK-ADSL2+-POTS-BCM-48A-2S
48-Port ADSL2+ Annex A/M with integrated derived POTS
MXK-ADSL2+-BCM-48A
48-Port ADSL2+ Annex A
MXK-ADSL2+-SPLTR600-BCM-48A-2S
48-Port ADSL2+ Annex A/M with Splitter (600 ohm)
MXK-ADSL2+-SPLTR900-BCM-48A-2S
48-Port ADSL2+ Annex A/M with Splitter (900 ohm)
Cables (Contact DZS Sales for additional Cabling Options)
Model
Description
MALC-CBL-ADSL-48
96PIN TO (2) 50PIN CONNECTOR, 48-PORT CARDS, 10FT/3.05M BLC
MALC-CBL-ADSL-48-100FT-BLUNT
96PIN TO BLUNT END, 100FT/30.5M BLC
MALC-CBL-ADSL-48-15FT
96PIN TO (2) 50PIN CONNECTOR, 48-PORT CARDS, 15FT/4.57M BLC
MALC-CBL-ADSL-48-30M
96PIN TO (2) 50PIN CONNECTOR, 48-PORT CARDS, 98.4FT/30M BLC
MALC-CBL-ADSL-48-30MF
96PIN TO 2 50 PIN FEMALE CONNECTOR, 98.4FT/30M LENGTH BLC
MALC-CBL-ADSL-48-350FT-BLUNT
96PIN TO BLUNT END, 350FT/106.7M BLC
MALC-CBL-ADSL-48-4FT
96PIN TO (2) 50PIN CONNECTOR, 48-PORT CARDS, 4FT/1.22M BLC
MALC-CBL-ADSL-48-50M
96PIN TO (2) 50PIN CONNECTOR, 48-PORT CARDS, 164FT/50M BLC
MALC-CBL-ADSL-48-70M
96PIN TO (2) 50PIN CONNECTOR, 48-PORT CARDS, 229FT/70M BLC
MALC-CBL-ADSL-48-UP-30FT
96PIN TO BLUNT, 48-PORT CARDS, ROUTES UP, 30FT/9.1M BLC
MALC-CBL-ADSL-48-UP-60FT
96PIN TO BLUNT, 48-PORT CARDS, ROUTES UP, 60FT/18