IMACS 600, 800, 900 and 8000.  Integrated Solution for Advanced Voice and Data

Overview

The concept of Integrated Access began with the introduction of the Integrated Multiple Access Communications Server; Premisys Communications’ revolutionary IMACS. Initially, the IMACS was a vision that brought bandwidth savings for voice and data access. IMACS has not strayed from its vision and has remained the most flexible, robust, and scalable integrated access solution in the telecommunications market today. In fact, DZS has continued to build on the promise to provide the most robust set of voice and data access services and applications on one manageable platform; the IMACS.

The IMACS, with over 50 optional service application modules and four flexible and scalable chassis options, provides an almost limitless combination of services, applications and network interfaces.

The IMACS is unrivaled in its network versatility and supports V.35, V.11/X.21 and up to eight T1/E1 and Fractional T1/E1 WAN interfaces.  An integrated digital cross-connect is available to consolidate multiple voice, data, and T1/E1 services. Five chassis models, IMACS 200, IMACS 600, 800, 900, and IMACS 8000 differ in their card capacity and card installation options (front, or front and rear).  Except the IMACS 200, all models support the same range of modular cards, power supplies, and system redundancy options. All IMACS systems can be fully managed either with local craft interface through a VT100, PC, or through MegaSys Telenium Element Management System using standard SNMP interfaces.

IMACS also offers a powerful array of integrated network diagnostic and fault isolation capabilities. These include Bit Error Rate Test (BERT), test tone and signaling state generation, digital and analog loopback support, and remote configuration and control. Because IMACS meets stringent standards criteria, including NEBS and CE, it can be deployed almost anywhere in your network.

With over 160,000 systems worldwide, the IMACS is designed to continuously meet the needs of a changing telecommunications landscape. With its advanced modular architecture, voice and data services can be deployed quickly and cost effectively. Applications include: POTS (FXS, FXO, E&M), voice compression (ADPCM), VPN access, Internet access, integrated routing capabilities, voice over Frame Relay, Digital Data Networks (DDN), analog private lines, and numerous others. The IMACS is being used in both public and private, as well as traditional facilities-based and wireless networks.

View printable version

Specifications

Modules
IMACS 600, 800, 900 Description IMACS 8000
PRM-801070 IMACS,WAN CARD,DUAL T1/E1, DSX/CSU STRAP FOR T1 8000-WAN-T1
PRM-801070-E1 IMACS,WAN CARD,DUAL T1/E1, DSX/CSU STRAP FOR E1 8000-WAN-E1
PRM-801470 IMACS,WAN CARD,DUAL T1/E1, DSX/CSU, W/RELAYS 8000-WAN-R-T1
PRM-801470-E1 IMACS,WAN CARD,DUAL T1/E1, DSX/CSU, W/RELAYS STRAP FOR E1 8000-WAN-R-E1
PRM-810860 IMACS,E&M,2WX8P,SS 8000-EM-2W-8P
PRM-811960 IMACS,E&M,4WX8P,W/EJECT 8000-EM-4W-8P
PRM-812960 IMACS, FXS, 2WX8P, 600 OHM, SS 8000-FXS-8P
PRM-813970 IMACS,FXO,2W,8P,SS 8000-FXO-8P
PRM-816460 IMACS,DSM,4P,SS
PRM-820260 IMACS,HSU,RS530/V.35,SS
PRM-820360 IMACS,HSU,2P,TRUNK/EIA-530,SS 8000-HSU-2P-V11
PRM-821260 IMACS,HSU,2P,SS 8000-HSU-2P
PRM-821570 IMACS,HSU,4P,RS530,W/EJECT,SS 8000-HSU-4P
PRM-822060 IMACS,SRU,10P,W/EJECT
PRM-822061 IMACS,SRU,10P,W/EJECT,SS
PRM-822160 IMACS, SRU,10P, W/EJECT
PRM-822570 IMACS,LOW DELAY SRU, 10 PORT 8000-LDSRU-10P
PRM-823870 IMACS, OPTICAL HSU, 4 PORT, 830NM, MULTIMODE 8000-OHSU-4P
PRM-824160 IMACS,OCU-DP,5P,SS 8000-OCUDP-5P
PRM-824660 IMACS,OCU-DP,10P,SS 8000-OCUDP-10P
PRM-8249 IMACS,OCU-DP,2P
PRM-825460 IMACS,DSO-DP,SS 8000-DS0DP-4P
PRM-840160 IMACS,ALARM,4P,SS 8000-ALARM-4P
PRM-840250 IMACS,ALARM,3P,W/EJECT,SSTE
PRM-840260 IMACS,ALARM,3P,SS
PRM-880370 PTO CONFIG – IMACS,CPU,XCON,6.X.Y HOST CODE, REDUNDANT CAPABLE
PRM-880460 PTO CONFIG – IMACS, CPU, RCON, 256K, 2M, SS
PRM-880770 PTO CONFIG – IMACS,CPU,XCON,7.X.Y HOST CODE, REDUNDANT 8000-CPU
PRM-881160 PTO CONFIG – IMACS, ACS, FRS, 64P, SS
PRM-881161 PTO CONFIG – IMACS, ACS, IPR, 64P, SS
PRM-881360 PTO CONFIG – IMACS,MCC,128P,SS
PRM-882570 IMACS, OC3 SERVER CARD 8000-OC3-PT2PT
PRM-883270 PTO CONFIG – IMACS, ROUTER, 10/100BASE-T
PRM-883275 PTO CONFIG – IMACS, ROUTER, 10/100BASE-T,PPP,8HS 8000-ROUTER-PPP-HS
PRM-883280 PTO CONFIG – IMACS, ROUTER,10/100BASE-T,HDLC 8000-ROUTER-HDLC
PRM-883570 PTO CONFIG – IMACS,PWE,SFP OR GIGE RJ45, 8 E1/T1 CAPACITY 8000-PWE
PRM-885070 PTO CONFIG – IMACS, ANALOG BRIDGING SERVER CARD 8000-BRIDGE
PRM-887170 IMACS,ADPCM SERVER ,SS 8000-ADPCM
PRM-8901 IMACS,P/S,AC,120-240V
PRM-890220 IMACS,DC POWER SUPPLY
PRM-8905 IMACS,P/S,110/220V-48VDC
PRM-890620 IMACS,RINGER
PRM-8907 IMACS,P/S,DC,24V
PRM-892060 IMACS,I/F,8P,T1/E1,32K,W/MOD,SS
PRM-892260 IMACS,I/F,8P,128K,NO MOD,SS
PRM-892360 IMACS,I/F,8P,128K,SS
PRM-892460 IMACS,I/F,128K,W/O MODEM,SS
PRM-893270 IMACS, RDNT, I/F, EXT SYNC, 8P, NO MOD, SS 8000-IF+EXT
PRM-893370 IMACS, RDNT, I/F, 8P, MODEM, SS 8000-IF+MODEM
PRM-893470 IMACS, RDNT, I/F, W/O MODEM,SS 8000-IF
IMACS 135W LOAD CARD – PRM-898070 8000-135W-LOAD
IMACS 8000,P/S,AC,120-240V, 135 WATT 8000-AC-135W
IMACS 8000,P/S,AC,120-240V,55 WATT 8000-AC-55W
IMACS 8000, FILLER PANEL, SS 8000-BLANK-FP
IMACS 8000,P/S,DC,48V,135 WATT 8000-DC-135W
Key Features
  • Over 50 Plug-In Modules for Voice, Data and IP
  • NERC security features
  • MegaSys Telenium management
  • Optical HSU Interface to Protection relays (IEEE C37.94)
  • WAN options: T1/E1, OC3 WAN and PWE3
Weight & Dimensions

IMACS 200 (HWD):

  • 3.5 in x 17.31 in x 9.48 in
  • 8.9 cm x 44 cm x 24.1 cm

IMACS 600 (HWD):

  • 9 in x 17 in x 9.12 in
  • 22.8 cm x 43.2 cm x 23.16 cm

IMACS 800 (HWD):

  • 9 in x 17 in x 15.3 in
  • 22.8 cm x 43.2 cm x 38.86 cm

IMACS 900 (HWD):

  • 15.4 in x 17 in x 9.12 in
  • 39 cm x 43.2 cm x 23.16 cm

IMACS 8000 (HWD):

  • 9 in x 17 in x 15.3 in
  • 22.8 cm x 43.2 cm x 38.86 cm
Power
  • 120 / 240 VAC
  • 48 VDC
  • 24 VDC (IMACS 600, 800, 900 only)
  • 125 VDC (IMACS 200 only)
  • Power consumption: 125 W (max)
  • Output Power: 55 W continuous, 135 W continuous available on IMACS 8000 only.
  • AC-to-DC power converter (-48 VDC)
  • Dual feed & redundancy
  • Ring generation
Interfaces
  • T1 or E1 (Up to 8)
  • V.35, RS-530, RS-232, RS-449, RS-422, V.24,
  • DDS, SLC96, 10BaseT
  • Optical HSU (IEEE C37.94)
  • 4-port Optical HSU
  • Optical OC3 WAN
  • IPR*4 PPP
  • IPR*4 HDLC
  • PWE3
Standards Support
  • ANSI 310-D
  • Bellcore GR-63-core (NEBS 3), GR-1089-core
  • Bellcore TR-TSY-000008
  • IEC 297-1
  • ITU-G703, G.704, G.732, G.735, G.736,
  • G.823, G.824

Voice

  • Analog voice (FXS, FXO, E&M)
  • Voice compression (ADPCM)
Protocol Support

NERC Security Features:

  • 256 user assignable unique users
  • Each user independently settable r/w privileges
  • 16 different user groups
  • RADIUS authentication
  • SNTP time server
  • Syslog
  • Login logs
  • Change logs
Management

Management Interfaces

  • Connectivity: modem, SLIP, PPP, FDL time slot 24 (T1) or SAA time slot 31 (E1), ISDN D-channel, frame relay PVC
  • SNMP

MegaSys Management System using Telenium

  • Manages networks of IMACS
  • Centralized management
  • Point & click graphical user interface
  • Management of configurations, alarms, connectivity, diagnostics
  • Multi-user environment
  • SNMP-based
  • Supports TELNET for emulation of craft interface
  • IP addressing for node addresses
  • RS-232, VT-100 craft interface
Regulatory Compliance
  • UL 459, 1459, EN60950
  • CE EN 500 81-1, 500 82-1, 55022, FCC part 15
  • FCC part 68, CTR 12, CTR 13, ACA T5016
Operating Requirements

Redundancy

  • Power supply
  • CPU
  • WAN interfaces
  • ADPCM
  • Analog Bridge
  • CPU-7 redundancy feature

Clocking

  • Stratum 4
  • Sources: internal, T1, E1, digital interface, external clocking

Ordering Information

Models
Model
Description
PRM-891630
IMACS 600 Chassis
PRM-891830
IMACS 800 Chassis
PRM-891930
IMACS 900 Chassis
8000-CHASSIS
IMACS 8000 Chassis