SHDSL BONDED ETHERNET ACCESS DEVICE: ETHX-3548-XX

Overview

The 8 port EtherXtend SHDSL Ethernet access ETHX-3584 device has been designed to deliver bonded high-speed Ethernet First Mile (EFM) services over SHDSL. The ETHX-3584 combines SHDSL bonding with advanced performance and management features to ensure high reliability, low latency, and maximum throughput.

DZS’ line of EtherXtend access devices are built for reliability and resiliency: EtherXtend’s dynamic and proactive performance monitoring ensures the quality of bonded groups, while its seamless failure recovery and hitless adds and drops ensure maximum uptime.

The EtherXtend is a hardware platform designed for a carrier environment. With application-aware traffic control services and built-in OAM, EtherXtend is able to provide more intelligence to a larger portion of the network than any other CPE. Its seamless integration into DZS’ MXK multiservice access platform ensures that EtherXtend is one of the leading choices for delivering business-class SLAs over Ethernet.

DZS’ ETHX-3584 provides 8 individual single copper pair SHDSL lines, each allowing for data rates up to 12.7 Mbps symmetrical bandwidth per port. The ETHX-3584 supports loop bonding, combining multiple copper pairs together for bandwidths of up to 100Mbps (8 ports) to a single customer.

Due to the success of its predecessor, the new ETHX-3584 will showcase the same key functionalities that ETHX-3400 family had. ETHX-3584 will still feature automatic load balancing and fail-over on bonded ports for optimum throughput and redundancy. Management options include 802.3ah OAM, CLI and HTTP. The ETHX-3584 also interoperates with DZS’s MXK EFM SHDSL Line Cards, and with other EtherXtend devices, ETHX-3584 and ETHX-3400 family, in bookended configurations.

In addition, new to the EtherXtend product line, the ETHX-3584 features CE 2.0 E-Line and E-Access certification, and standards-based IEEE 802.1ag (Fault Detection) and ITU Y.1731 (Performance Monitoring). Also new to the ETHX-3584 is Jumbo Frame support up to an MTU of 10,240 (including FCS).

View printable version

Specifications

Key Features
  • CE 2.0 E-Line and E-Access Certification
  • IEEE 802.1ag (Fault Detection)
  • ITU Y.1731 (Performance Monitoring)
  • Automatic load balancing and fail-over on bonded ports
  • Interoperates with MXK EFM SHDSL line cards, or in bookended configurations with itself or utilizing ETHX-3400 family CPEs.
  • Management options include 802.3ah OAM, CLI, and HTTP
  • Extended Rates up to 12.7 Mbps per loop
Weight & Dimensions
  • 3.35 lbs (1.52 kg)
  • 1.75” (4.45 cm) High x 10” (21.6 cm) Wide x 7.5”
  • (19.1 cm) Deep
Power
  • 48V DC and Universal AC power options available
  • Max power consumption: 22 watts
Interfaces
  • 8 extended-rate SHDSL (2Base-TL) Interfaces
  • 4 10/100 Ethernet Interfaces
Standards Support
  • ITU G.994.1 G.handshake
  • IEEE 802.3 Ethernet
  • IEEE 802.3ah EFM (2Base-TL)
  • IEEE 802.1Q/p
  • IEEE 802.1ag (Fault Detection)
  • ITU Y.1731 (Performance Monitoring)
  • CE 2.0
Protocol Support
  • Host-based routing for per-interface IP address assignments
  • Network-based routing for per-interface IP subnet assignments
  • IP host and gateway support
  • RFC 1483/2684 Encapsulation
  • 802.1D support
  • Jumbo Frame support (>2k)
  • IPv6 Tested for Bridged Services
Management
  • Serial terminal and telnet for Command Line Interface (CLI)
  • In-band IP via 10/100 Ethernet or WAN port
  • Web UI
Operating Requirements
  • Temperature: 32ºF to 104ºF (0ºC to 40ºC)
  • Non operating temperature: -40ºF to 158ºF (-40ºC to 70ºC)
  • Humidity: 5% to 95%, non-condensing
  • Altitude: -200ft to 16,500ft (-60m to 5,000m)

Bandwidth / Distance

  • Data rates provisionable up to 12.7Mbps symmetrical
  • (TCPAM 4, 8, 16, 32, and 64)
  • Distances up to 24,000ft/7,320m
  • Cross-talk cancellation within bonded groups
Regulatory Compliance
  • EMC: FCC Part 15, CSA/C108.8, EN55022, CE Marking
  • Safety: CSA C22.2.60950-1:2007, UL 60950-1:2007, EN 60950-1/A1:2010
  • CE Marking

Ordering Information

Model
Description
ETHX-3584-DC
8 port Extended Rates EFM SHDSL Ethernet Access Device, DC Power
ETHX-3584-NA
8 port Extended Rates EFM SHDSL Ethernet Access Device, AC Power (NA plug)
ETHX-3584-UK
8 port Extended Rates EFM SHDSL Ethernet Access Device, AC Power (UK plug)
ETHX-3584-EU
8 port Extended Rates EFM SHDSL Ethernet Access Device, AC Power (EU plug)